News 

|

About the Association

|

Scientific Centre

|

Certification Authority

|

Test Facility

|

Contact Information

 

Рейтинг@Mail.ru

Test Facility

Testing laboratory of the Scientific Centre of Ceramics under the VNIISTROM – Accreditation Certificate No. РОСС RU.0001.21СА65 issued for the period from November 02, 2010 up to November 02, 2015 – carries our independent tests of construction materials including certification tests.

The priority trend of the Association’s activities being elaboration of standards, regulations and specifications for the ceramic materials industry, foundation of the test laboratory equipped with the state-of-the-art equipment (such as a test hydraulic press with the maximum rated load of 2,500 kN and base plates having the dimensions increased up to 550×500 mm; an abrasion-testing machine), enables:

  • to receive experimental characteristics for a wide range of products starting from large-sized stones to clinker bricks, including the ones used for sidewalks paving;
  • to conduct comparative tests, including tests according to the methods envisaged by the European norms.

Abrasion-Testing Machine LKI-3M

Abrasion-Testing Machine LKI-3M

The machine is designed for testing

  • wearing properties in accordance with GOST 13087-81 (concrete, paving slabs, clinker bricks);
  • wear resistances of unglazed ceramic tiles in accordance with GOST 27180-2001.

Test presses are designed for ultimate load definition at construction products tests for compression or bend (using a special device). Measured force, loading speed and maximum value of loading are visualized in absolute units (kN) on the digital display.

Test Press IP-500М
with a Bending Fixture

Test Press IP-500М 
with a Bending Fixture

Compression Test Press IP-2500М

Compression Test Press IP-2500М


Technical features of the test hydraulic presses

Technical features of the presses IP-500М IP-2500М
Maximum rated load, kN 500 2500
Maximum height of operating space, mm 350 1000
Width of operating space, mm 340 530
Maximum speed of operating cylinder piston, mm 100 150
Size of base plates, mm 320х320 550х500
Value of minimum force gauge, kN 0,01 0,1
Load measurement maximum permissible error
within 2…100 %Fmax, %
±1
Range of loading operating speed, kN/s 0,25…25 1,0…100

© Ceramic Materials Manufacturers Association, 2010-2017
2a Shchelkovskoe Shosse, 105122, Moscow, Russia   |   Tel./fax: +7 (495) 557 22 45   |   E-mail: info@apkm.info